Bond Cleaning
The Ultimate Bond Cleaning Checklist for Brisbane Tenants
Your complete, room-by-room guide to passing a strict final rental inspection in QLD.
Updated 15 January 2026
The Only Bond Cleaning Checklist Brisbane Renters Need
Getting ready to pack up your life and change houses is incredibly draining. However, before you can completely close the door on your old place, there is one major obstacle left: the final exit inspection. Property managers across Queensland use a highly detailed, rigid checklist to inspect your rooms. Missing a single dusty light fixture or greasy cupboard ledge can result in a delayed refund or a dispute over your money.
To make sure you get every cent back without the stress, here is the bond cleaning checklist Brisbane property managers commonly work through when they walk through a rental property. Whether you are planning to spend your weekend tackling the scrubbing yourself or hiring professional help, this guide will keep you on track.
1. Bedrooms
- Ceiling fans & cobwebs: clean all ceiling fans and remove cobwebs.
- Windows, sills & tracks: clean all internal windows, sills, and tracks.
- Light fittings: clean light fittings and remove any dead bugs.
- Wardrobes: clean wardrobe walls, shelves, and doors.
- Walls & power points: clean scuff marks on high-traffic areas near power points.
- Switches & skirting: clean light switches, power points, doors, and skirting boards.
- Air conditioner filters: clean filters where applicable.
- Floors: vacuum and mop floors.
2. Bathrooms
- Switches & doors: clean all light switches, power points, and doors.
- Light fittings: clean light fittings and remove any dead bugs.
- Walls: clean scuff marks on high-traffic areas near power points.
- Toilet: wipe and disinfect the toilet.
- Shower & tiles: clean shower screen and tiles (discoloured grout may not fully lift).
- Exhaust fan: clean the fan and filters.
- Bathtub: wipe and disinfect the bathtub.
- Windows: clean windows, sills, and tracks.
- Mirrors: clean all mirrors.
- Floors: vacuum and mop floors.
3. Kitchen
If there is one room where a property manager will pull out a white-glove inspection, it is the kitchen. The checklist covers:
- Cupboards: clean inside and outside of all kitchen cupboards.
- Benchtops: wipe down kitchen bench tops.
- Walls: clean scuff marks near power points.
- Windows: clean all internal windows, sills, and tracks.
- Ceiling fans: clean and remove cobwebs.
- Light fittings: clean and remove any dead bugs.
- Dishwasher: wipe down the dishwasher.
- Oven: clean the oven thoroughly.
- Skirting boards: clean skirting boards.
- Rangehood & cooktop: wipe down rangehood and cooktop.
- Sink: clean the sink.
- Floors: vacuum and mop floors.
4. Lounge / Dining Room
- Windows: clean all internal windows, sills, and tracks.
- Switches & skirting: clean all light switches, doors, and skirting boards.
- Ceiling fans: clean and remove cobwebs.
- Walls: clean scuff marks near power points.
- Light fittings: clean and remove any dead bugs.
- Air conditioner filters: clean filters where applicable.
- Floors: vacuum and mop floors.
5. Laundry
- Ceiling fans: clean and remove cobwebs.
- Windows: clean all internal windows, sills, and tracks.
- Light fittings: clean and remove any dead bugs.
- Sink & cupboards: clean the sink and cupboards.
- Mirrors: clean all mirrors.
- Floors: vacuum and mop floors.
Optional Additional Services
Optional additional services available where required include external window cleaning, curtain cleaning, blind cleaning, upholstery cleaning, carpet steam cleaning, full wall washing, balcony cleaning, pest control and flea treatment. These are separate from the standard bond clean.
Additional Information
The standard garage scope is sweeping only; detailing, pressure washing and oil-stain removal are not included. For safety, standard cleaning is limited to areas safely accessible using a step ladder of up to approximately three steps. Higher or difficult-to-access areas may be excluded or require separate arrangements. Permanent stains, discoloured grout, permanent marks, mould damage, damaged surfaces, deterioration and fair wear and tear may not be removable through cleaning.
Should You DIY or Hire Professional Exit Cleaners?
Ticking off a comprehensive bond cleaning checklist Brisbane-wide takes an average of 10 to 16 hours of intense physical labour for a standard three-bedroom house. If you don't have the time, the patience, or the specialised equipment required to scrub window tracks and ovens, leaving it to a professional team can be a smart move.
Hiring an experienced vacate cleaning specialist means you can hand over the keys knowing the heavy work has been managed properly. Many tenants find it gives them peace of mind during what is already a stressful moving period.
What to Look for in a Bond Cleaning Service
- What's included in the service? Make sure you understand exactly which areas and items are covered in the standard package.
- Do they offer re-clean support? Some companies will return to fix any missed spots if your property manager finds issues.
- Are there any hidden fees? Standard oven cleaning and internal windows should be clearly identified; external windows and balcony cleaning are optional additions.
- What equipment do they use? Professional-grade equipment often delivers better results than standard domestic gear.